DT15 series｜Rubber Safety Mats｜DADISICK
- model
- DT15 series
nemovitost
- Detection method:
- Pressure sensing method
- Maximum allowable load (8 hours):
- ≤ 400 N/cm²
- Trigger Force:
- ＞20 kg
- Mat Thickness:
- 15 mm
- Anti slip surface layer:
- Anti slip grade R9
- Encapsulation and Surface Protection:
- NBR rubber
Hodnocení
Popis produktu
|
Model Specifications
|
||
|
Safety pad size (L1×L2)
|
DT15 type |
|
NBR overall package anti-rolling type |
||
Thickness 15mm |
||
300mmx300mm | DT15-300x300 | |
400mmx400mm | DT15-400x400 | |
500mmx250mm | DT15-500x250 | |
500mmx400mm | DT15-500x400 | |
500mmx500mm | DT15-500x500 | |
600mmx400mm | DT15-600x400 | |
750mmx250mm | DT15-750x250 | |
750mmx500mm | DT15-750x500 | |
750mmx750mm | DT15-750x750 | |
1000mmx250mm | DT15-1000x250 | |
1000mmx500mm | DT15-1000x500 | |
1000mmx750mm | DT15-1000x750 | |
1000mmx1000mm | DT15-1000x1000 | |
1500mmx500mm | DT15-1500x500 | |
1500mmx750mm | DT15-1500x750 | |
1500mmx1000mm | DT15-1500x1000 | |
Dimensions of outer edge with aluminum flange | L1+120mmxL2+120mm | |
Remark: 1.The size of the safety mat is the net size without the aluminum edge, and the size error is ±6mm； 2.Accept non-standard size safety mat customization. The length of one side of non-standard size safety mat should be <3000mm, and the area should be ≤1.5m²； 3.Accept the design and customization of special-shaped safety mats, and the user needs to provide the floor plan of the protection area and technical requirements.The maximum area of special-shaped safety carpet is ≤3m². | ||
|
Technical Parameters
|
||
|
model
|
DT15 |
|
|
Detection method
|
pressure sensing method |
|
|
Trigger Force
|
＞20 kg |
|
|
Maximum allowable load (8 hours)
|
≤ 400 N/cm² |
|
Mechanical life | ＞3,000,000 times | |
Encapsulation and Surface Protection | NBR rubber | |
Ambient temperature | -10℃ ~ +55℃ | |
Degree of protection | IP65 | |
Maximum humidity (23 degrees) | 95% (condensation) | |
|
Arrange classification
|
||
|
Response time
|
13ms |
|
|
EN 1760-1 Reset command
|
Support |
|
|
ISO 13849-1: 2015
|
Cat.3 |
|
|
MTTFd
|
>30 years |
|
B10d | 3×10⁷ | |
Nop (accept) | 52560/year | |
IEC 61508: PFHS | 6.99*10¹⁰ 1/h(SIL3) | |
Selection of relays
Wiring diagram
K-type dual channel 4-wire mat connected relay Ter-A safety input with manual reset
R-type 2-wire mat connected relay Ter-A safety input with manual reset
Sensing output - K-K series combination of safety mats
Sensing output - R-K series combination of safety mats
DOCUMENTS & DOWNLOADS
CATALOGUE